Bitumen grade 60/70 is a premium brand that is dark brown or black color similar to cement-shape semi-solid or viscous liquid form produced by the non-destructive refining of crude oil during petroleum refining.
Penetration Bitumen 60/70
The exact chemical composition of bitumen 60/70 is dependent on the chemical complexity of the original crude oil and the manufacturing process. Penetration bitumen grade 60/70 has properties of 60~70 desimilimeter and softening point 46~58 Deg.C.
Bitumen extracting is hard but it can bubble naturally to surface in petroleum seeps.
Seeps are places where fossil fuels and petroleum products leak out of the Earth instead of being trapped deep below the ground.
In these seeps, bitumen, asphalt, and tar bubble up into pools.
In addition, bitumen is the main fossil fuel component of oil sands. Bitumen combination with asphalt is solid, uses in paving.
Application of bitumen 60/70 grade:
Bitumen 60/70 mainly uses in construction. Furthermore, it serves in paving and roofing apples.
85% of bitumen uses in asphalt industry.
10% used in roofing, because it`s waterproofing qualities help make roofs function well.
5% using for sealing and insulating purposes in building materials such as carpet tile.
In addition, it uses in soundproofing, explosives, fence post coating, mildew protection, a binder in briquettes, a backing to mirrors, shoe solesand soil stabilization
The exact chemical composition of bitumen 60/70 is dependent on the chemical complexity of original crude oil also manufacturing process. Penetration bitumen grade 60/70 has properties of 60~70 desi-milimeter and softening point 46~58 Deg.C.
Bitumen 60/70 is Elastic and Plastic:
When one takes a thread of bitumen 60/70 from a sample and stretches or elongates it, it is the power to return to a length preparing to its original length eventually.
For many bitumen 60/70 this technique might take longer than others.
When temperatures unit of measurement raised, equally as once a load is applied to bitumen 60/70, the bitumen 60/70 will flow, but will not come back to its original position once load is removed.
This condition is alleged as plastic behavior. Applying a load implies that you simply place a weight on the bitumen 60/70 therefore on subject it to fret.
This may well be throughout a groundwork science lab or at intervals the bitumen 60/70 final position at intervals the road and it's done to assess the bitumen 60/70 reaction to the load.
Date Sheet of penetration bitumen 60/70:
|Bitumen 60/70||Specification||Test method|
|Specific gravity @ 25/25 cg||1.01/1.06||D-70|
|Penetration @ 25 c||70/60||D-5|
|Softening point c||48/52||D-36|
|Ductility @25 c||100 min||D-113|
|Loss on heating(wt) %||0.2 Max||D-6|
|Drop in penetration after heating %||20 Max||D-6 D-5|
|Flash point c||250 min||D-92|
|Solubility is CS2(wt) %||99.5 Max||D-4|