70C and it is available in bag and drum but in summer time it is risky to take it in the bag due to leakage of bitumen 30 inside of the container.
Bitumen Number 30 is producing by bitumen #60 and after heating up and lost 5% of total weight the first grade of oxidized bitumen is Number 30.
Applications Bitumen No. 30#1. Used For underground moisture, waterproofing works
2. Used For nuclear power engineering, pipeline engineering, bottom anticorrosion, asphalt production of the production
3. Used For waterproofing membrane, moisture-proof paper production, etc.
4. Used For Anti-corrosion paint and waterproof production
5. Used for road and bridge caulking use
|Penetration (25 ° C, 100 g, 5 s) / (0.1 mm)||36-50|
|The ductility (25 ° C, 5 cm / min) / cm is not less than||3.5|
|Softening point (ball method) / ℃ not less than||60|
|Solubility (trichloroethylene) /% is not less than||99.5|
|Evaporation loss (163 ° C, 5 h) /% no more than||1|
|After evaporation, the penetration ratio (25 ℃) /% is not less than||65|
|Flashpoint (open cup) / ℃ not less than||230|
|Brittle / ℃||report|
Bitumen No. 30 Packingbitumen #30 in various packing including kraft bag, meltable plastic bag, drum and bulk, it is made by hot air in a controlled process until the desired specification is reached.
Bitumen #30 means softening point is 60°c and penetration is 36 desimillimiter is produced in compliance and conformity to Astm standard and meets the mentioned specification.