Oxidized Asphalt 105/35
Oxidized Asphalt 105/35 is produced by either Continuous or Staggered Blowing Process. Heated Penetration Grade Bitumen under controlled environment is blown with air which controls the Oil Content in the Bitumen while it oxidized. The different grades for suited applications produced are designated by two numbers to indicate the mid-points of their softening point and penetration ranges.
Oxidized Asphalt 105/35 is the semi-solid oxidized grade of pure petroleum bitumen categorized in polycyclic aromatic hydrocarbons is normally used for different purposes in the construction business.
Oxidized Asphalt 105/35 is the suitable grade of oxidized asphalt to use as bonding compounds as hot melt adhesive at an application rate of approximately 1 Kg/m3 to bond the preformed sheets together and to structure which is made by blowing bitumen 60/70 by very hot air.
Chemical Mine World is one of the market leaders in Production, Exports, and brokerage different grades of Blown Asphalt with excellent quality.
Our sales team is committed who understands your requirements due to many years of experience in supplying the bitumen products. If you are more interested in product information or need to place an order contact or inquire our Sales team.
Application of Oxidized Asphalt 105/35:
Oxidized Grade Bitumen shall be broken up into small pieces and heated slowly to the application temperature of 220ºC to 230ºC.Oxidized Bitumen should be heated double temperature against the softening point to be able to have flow and viscosity.
Blown asphalt also is the aesthetic adhesive substrate for asphalt membranes. In addition metal and concrete protective coating under atmospheric conditions.
Oxidized Bitumen 105-35 is used for coating of pipelines. Also impregnated of the coating of papers and boards.
Bonding agent for tiles and mastic also bonding agent for cork plates and adhesive for roofing felts. Furthermore, Blown bitumen is adhesive for laminated boards for protection for electrical wires.
Hard asphalt grades also suitable for sealing saw cuts and joints where there is expected to be the minimum amount of moving in the joint. Their wide temperature range prevents bleeding in high-temperature uses.
Oxidized asphalt can also be used in industrial usages like roofing, flooring, mastics, pipe coatings, electrical roles.
Storage/Handling:
10 Years with multi time heating and colding, please refer to MSDS. Pars Universal Bitumen Company guaranty the quality of Oxidized Bitumen 150/5 with the arrangement of international warden to check quality and quantity of product during the loading to the vessel. Also controlling production by QC by batch test report before shipping.
Health & Safety of Oxidized Asphalt 105/35:
Workers should wear protective masks, gloves, and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline. Care should be taken when heating Oxidized Asphalt 105/35 to avoid over heating.Packing of blown asphalt 105/35:
The Chemical Mine World is manufacturer of blown asphalt 105/35 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 105/35 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached.The Chemical Mine World oxidized bitumen 105/35 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges.
The oxidized asphalt grade 105/35 means softening point is 105°c and penetration is 35 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.
Datasheet of Oxidized Asphalt 105/35:
| Bitumen 105/35 | Test method | Unit | Specification |
| Specific gravity @25/25 C | ASTM D70 | (Kg/m3) | 1.05 approx. |
| Penetration @ 25°c | ASTM D5 | mm/10 | 30/40 |
| Softening point °c | ASTM D36 | °C | 100/110 |
| Loss on heating(wt) % | ASTM D6 | Wt. % | 0.2 max |
| Flash point c | ASTM D92 | °C | 250 min |
| Solubility is CS2(wt) % | ASTM D4 | Wt. % | 99.5 max |
| Specific gravity @25/25 C | ASTM D70 | (Kg/m3) | 1.05 approx. |
